Cool vs. Noise — a delicate balance in my quest for the silence of the fans. I ask myself, “just how many fans are too many before I find myself having to crank up the volume on a riveting scene of Burn Notice?” Fans do the job, but they can be annoyingly loud for the purposes of home entertainment.

One of the problems I’m having with Trinity’s fan setup is airflow optimization. There really isn’t enough space to direct air in a straight path over the components I want to keep cool, mainly the CPU. From the power supply, to the mess of wiring, air is buffeting around the case’s many obstacles. I’ve tidied things up quite a bit with wire sheathing and cable ties, but it’s still pretty messy. Read the rest of this entry »


After making such a killing sniping great prices for parts, I was understandably eager to rip the cellophane and get to work. But actually, I was holding off because I intended to do the build with my little nephew. He… had other plans so I was on my own. As I mentioned previously, I was pretty much following the parts list provided in tonymacx86’s CustoMac Mini 2011 post with one small exception, the case.

He listed the Apex MI-008, but I chose the MI-100 instead. I stuck with the same manufacturer because I didn’t want any unforeseen fitting issues and their frames were pretty much identical. I really just found the face of the MI-100 to be more pleasing. The directions that came with the case weren’t exactly crystal clear, but after some trial and error I managed to put the right screws in the right places. I have to say, making all the connections to the motherboard was a little intimidating. Most of my experience so far was with laptops. But I knew enough to ground myself and avoid bending any of the pins on the processor (It seems now they have they pins on the motherboard instead). I also had Gigabyte’s instructions, which where a little easier to follow. The first thing I noticed

Read the rest of this entry »

%d bloggers like this: